Unipulse DeviceNet F381A, Руководство по эксплуатации

Страница: 44 / 164

35
3 SCREENS AND OPERATIONS
35
SCREENS AND OPERATIONS
Chapter
3
Load/displacement HI and LO limits:
The HI and LO limits of each section are indicated
by red lines.
The measurement waveform display area on the Main screen is as follows:
- About the display range
For example, this function is convenient for changing the display range with an observation of the
details of the waveform.
1.
On the Wave Check screen, display the part you want to analyze by zooming in/out
and/or moving the graph.
2.
Press , and select the work No. to set the present display range.
3.
You can input numerical values to Y-axis Start Point, etc., but press as it is
if such an input is not needed.
■
Setting screen
Display
The present time is displayed.
Keys
: Moves to the First Setting screen.
: Moves to the Work Setting screen.
: Moves to the Main screen.
LO limit of HI limit of
HI limit of load
LO limit of load
displacement displacement
Measurement waveform Waveform display Section display
display area on the Main screen
＝ ＋
Although it will be explained later, “Work Setting” includes the item “Display
Range Setting.” With this, you cannot make settings while observing the
waveform; therefore, do so from Wave Check.
Point
Present time
Year
2 0 0 6 / 0 2 / 0 1 / 1 9 : 0 5
Month Day Hour Minute
(24-hour display)