Unipulse DeviceNet F381A, Руководство по эксплуатации

Страница: 103 / 164

94
5 COMMUNICATIONS
94
COMMUNICA
TIONS
Chapter
5
② Read the measurement results.
- Waveform update check/equipment ID read command
Host
(Transmission to the F381A)
U T L R E S Delimiter
（
STX
）
Delimiter N 1 G
F381A’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format
F381A’s return
(In normal processing)
Command received
Load result
-: Section not in use
1: OK
2: HI
3: LO
4: H/L
5: NG
Displacement result
4 1 ， 3 2 3 3 ， Delimiter
-: Section not in use
or X-axis; time
1: OK
2: HI
3: LO
4: H/L
5: NG
（
STX
）
1 L R S
，
E U T 4 4 3
，
1 3
， ，
2 4
Total result Section1
by the F381A Judgment
Section2
Judgment
Section3
Judgment
Header (If there is no header, no data will result.)
Section4
Judgment
Section5
Judgment
Waveform
Comparison
Load Load Load Load
Load Load Load
Judgment
Displacement Displacement Displacement Displacement
Displacement Displacement Displacement
Host
(Transmission to the F381A)
P E L S A M Delimiter
F381A’s return
(In normal processing)
（
STX
）
Delimiter 0 L S M 3 A P E 1 1
Undefined
Work No. used for measurement
Header (If there is no header, no data will result.)
Waveform update
0: Not made
1: Made
(If an update is made, this bit changes
from 0 to 1 only once upon reading.)
5 1 8
Equipment ID
* Equipment ID is a parameter.
(It can be set from the touch panel only
when the SD card slot option/Ethernet option
is mounted.)
（
STX
）
Delimiter N 1 G
F381A’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format