Page 37
P O W E R I N G T E C H N O L O G Y
Manual No. PM110-6500-00 rev-2a
PM110-6500-00-rev2a-0117.indd
Chapter 7 Replacing Modules
7.1 Controller Replacement
A blank panel or faulty Controller can be easily replaced with a new controller:
1.
Loosen the front screw(s) at the top of the controller or blanking panel using a flat or
Pozidrive screwdriver as appropriate, see Figure 7-1.
Figure 7-1 Unlocking the Controller / Removing the Blanking Panel
2. If removing a controller out it of the shelf as shown in Figure 7-2.
Figure 7-2 Removing the Controller
3. Reverse the process to insert the new controller into the empty slot and fasten the screw.
CAUTION
After controller start-up, verify if the appropriate configuration file is uploaded
to the controller. If necessary, refer to the
.
