46
Kind 2 (132-142)
Item
Description
Default
Instruction
132
Invalid dialing duration after the intercom
call is hung up
0001
0-9999 ms
Remark: The last display data will be keeping
until the setting time is over.
133 LCR pointer
0000
000: Do not implement LCR function
001-009: Select ARS group directly
100-299: Refer to K22 table
300-499: Refer to K23 table
500-699: Refer to K24 table
700-749: Refer to K25 table
Application: When the station user makes the
CO call and needs to use the LCR function.
Related program: K21-25
134 Line type of Direct/Blind Call forwarding
0:23456
9
2: Intercom
3: CO call
4: Doorphone call
5: Incoming call from PBX 1
6: Incoming call from PBX 2
9: DISA & Voice mail
135 Display mode of LCR
0
0: Original number
1: New number
Related program: K 2 item 133
136
Switch to conference call by pressing the
“TRAN” key
0
0: Disable
1: Enable and switch to conference call directly
To press "TRAN" key and dial the station no. or
CO outgoing telephone no. while speaking, and
then press "TRAN" key again when connecting
and it will switch to conference call directly.
137 The starting digit of Caller ID of SLT
10
Setting value: 0-16
It will not send the digit when the value is “16”.
0 1 2 3 4 5 6 7 8 9 *:11 #:12 A:13 B:14 C:15 D:10
138 The ending digit of Caller ID of SLT
15
139
Display Caller ID No./ station No. on this
SLT station
0
0: No
1: Yes
2: Send CID after communicating
Application: Please set at “1” when connected with
the display single line telephone (analog phone).
140 Active On-line point-out/teaching function
0
0: No
1:Yes
Application: to point-out/teaching the staff while
talking.
Relative function no. 66
141 Line type under monitoring/recording
0
0: Null
1: Station line
2: CO line
3: Station & CO lines
Related program: K2 item 130
142
To ring the master station if the sub-ringing
station is on busy
0: Yes (Enable to dial in the master station.)
1: No (Unable to dial in the master station)
Relative program: K2 Item90
