Union Community UBio-X Pro2 Скачать руководство пользователя страница 39

Страница: 39 / 89

UBio-X Pro2 User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :[email protected]; http://www.unioncomm.co.kr

[Register FP]

the case you tried to registered the fingerprint already

registered. (But, you can input the same fingerprint

with the same user ID).

※ If you want to register the same fingerprint in the
different ID, you should uncheck the ‘System



Fingerprint recognition



preventing the similar

fingerprint registration’. But, in this case, because

the same fingerprint can be authorized as different

ID, it is not suitable for the attendance management.

3.3.2. Delete

The following window appears if you click

[User]



[Delete]

at the main menu.

Input the user ID to be deleted and click

[OK]

button.
Click

[BACK]

button to cancel and return.

If you input the unregistered ID, the failure message

“Unregistered user” appears, and if you input the

registered ID, the success message “Deleted”

appears.

But, the deletion in the terminal is not led to the deletion in the server, so if you want to

delete completely, you should delete it in the server.

It deletes both user and admin, so you should be cautious, and the user registered only

in the terminal cannot be recovered.

Содержание UBio-X Pro2

























































































Результаты поиска

Содержание UBio-X Pro2

Отзывы:

Похожие инструкции для UBio-X Pro2

Бренды по названию

Популярные бренды

Union Community UBio-X Pro2, Руководство пользователя

Результаты поиска

Содержание UBio-X Pro2

Отзывы:

Похожие инструкции для UBio-X Pro2

Бренды по названию

Популярные бренды