Union Community UBio-X Pro2 Скачать руководство пользователя страница 3

Страница: 3 / 89

UBio-X Pro2 User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :[email protected]; http://www.unioncomm.co.kr



Admin, Administrator

A user who can enter into the terminal menu mode, he/she can register/modify/delete

terminal users and change the operating environment by changing settings.

If there is no administrator for a terminal, anyone can change the settings. In this

regard, it is recommended to register at least one administrator.

Caution is required with registration and operation because an administrator has the

right to change critical environmental settings of the terminal.



1 to 1 Verification

A user’s verification fingerprint (template) is compared to the user’s enrollment

fingerprint (template) previously registered. The terminal performs 1:1 matches

against the user’s enrolled template until a match is found.

It is called 1 to 1 Verification because only the fingerprint registered in the user’s ID or

card is used for comparison.



1 to N Identification

The terminal performs matches against multiple fingerprints (templates) based solely

on fingerprint information.

Without the user’s ID or card, the user’s fingerprint is compared to fingerprints

previously registered.



Authentication level

Depending on the fingerprint match rate, it is displayed from 1 to 9. Authentication is

successful only if the match rate is higher than the set level.

The higher the Authentication level, the higher the security. However, it requires a

relatively high match rate, so Authentication is vulnerable to failure.

1:1 Level: Authentication level used for 1:1 verification

1:N Level: Authentication level used for 1:N identification



Authentication Method

This represents the various types of authentication, including Face authentication, FP

(fingerprint) authentication, RF (card) authentication or a combination of these

methods.

Example: Face or FP: Authentication with face or fingerprint



LFD (Live Finger Detection)

- This function allows the input of only real fingerprints and blocks the input of imitation

fingerprints produced using rubber, paper, film, and silicone.

Содержание UBio-X Pro2

























































































Результаты поиска

Содержание UBio-X Pro2

Отзывы:

Похожие инструкции для UBio-X Pro2

Бренды по названию

Популярные бренды

Union Community UBio-X Pro2, Руководство пользователя

Результаты поиска

Содержание UBio-X Pro2

Отзывы:

Похожие инструкции для UBio-X Pro2

Бренды по названию

Популярные бренды