(7)
Snip the liner off 3mm past the end of the
torch neck.
(1)
Remove MIG torch front end parts
(2)
Remove the liner retaining nut
(5)
Carefully feed in the new liner down the torch
lead all the way to exit the torch neck.
(8)
Replace the front end parts
(9)
Fully screw down the liner retaining nut and
nip it up tight. This compresses the liner inside
the torch cable assembly preventing it moving
during use and ensures good wire feed.
(3)
Carefully pull out and completely remove the
liner
(6)
Fit the liner retaining nut and screw only 1/2
way down.
(4)
Carefully unravel the new liner, avoiding
creating any kinks in the liner.
18
| VIPER MIG 185 Manual
MIG TORCH LINER INSTALLATION
