Unimig KUMJRDP210 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 60

background image

2

Thank you for your purchase of your UNI-MIG welding machine.

We are proud of our range of welding equipment that has a proven track record of innovation,

performance and reliability.

Our product range represents the latest developments in Inverter technology put together by our

professional team of highly skilled engineers. The expertise gained from our long involvement with

inverter technology has proven to be invaluable towards the evolution and future development of

our equipment range. This experience gives us the inside knowledge on what the arc

characteristics, performance and interface between operator and machine should be.

Within our team are specialist welders that have a proven history of welding knowledge and

expertise, giving vital input towards ensuring that our machines deliver control and performance to

the utmost professional level.

We employ an expert team of professional sales, marketing and technical personnel that provide

us with market trends, market feedback and customer comments and requirements. Secondly they

provide a customer support service that is second to none, thus ensuring our customers have

confidence that they will be well satisfied both now and in the future.

UNI-MIG welders are manufactured and compliant with - AS/NZ60974.1 2006 - AS60974-6:2006

guaranteeing you electrical safety and performance.

WARRANTY

• 3 Years from date of purchase. ( on power source only )
• Welding Guns Of Australia PTY LTD Ltd warranties all goods as specified by the manufacturer

of those goods.
• This Warranty does not cover freight or goods that have been interfered with.
• All goods in question must be repaired by an authorised repair agent as appointed by this

company.
• Warranty does not cover abuse, mis-use, accident, theft or general wear and tear.
• New product will not be supplied unless Welding Guns Of Australia PTY LTD has inspected

product returned for warranty and agree’s to replace product.
• Product will only be replaced if repair is not possible
• Please view full Warranty term and conditions supplied with machine or at www.unimig.com.au/

warranty.asp or at the back of this manual.

«
1
2
3
4
...
»

Содержание KUMJRDP210





























































Отзывы:

Нет отзывов

Похожие инструкции для KUMJRDP210

Бренд: Zadako Страницы: 15

Metalmaster 200d Pro DC GTAW

Бренд: Tokentools Страницы: 33

PORTAGANTRY 11000

Бренд: REID LIFTING Страницы: 21

CIRCOtransfer 30 E

Бренд: wagner solar Страницы: 32

Бренд: Onkyo Страницы: 9

Бренд: Alecto Страницы: 25

InverArc 160 Plus

Бренд: HTP Страницы: 10

Бренд: QMotion Страницы: 16

Бренд: Alto Страницы: 37

Бренд: Haken Audio Страницы: 7

Бренд: X10 Страницы: 28

PRO-CRAFT240 MIG

Бренд: Uni-Mig Страницы: 13

Бренд: E2S Страницы: 11

Бренд: Mirage Страницы: 19

Бренд: Pro Spot Страницы: 44

Бренд: Dorex Страницы: 2

Aristocrat NPS 6010-MY/LWM-7

Бренд: Oklahoma Sound Страницы: 4

Бренд: Oerlikon Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды