Unilumin Uslim-O Series, Руководство по эксплуатации продукта

Страница: 70 / 92

Chapter 5 Startup, Shutdown, and Maintenance
60
Chapter 5 Startup, Shutdown, and Maintenance
5.1 Startup Sequence
1) Start the distribution box for the LED display.
2) Start the control computer.
3) Start the video processor.
4) Start the sending box.
5.2 Shutdown Sequence
1) Shut down the video processor.
2) Shut down the sending box.
3) Shut down the control PC.
4) Shut down the distribution box for the LED display.
5.3 Maintenance
1) Check whether ambient temperature and humidity meet the operating conditions
for the LED display on a daily basis.
2) Use the LED display and its auxiliary devices at least twice a week and two hours
each time. Before using the LED display, perform warm-up operations on the LED
display if it has been idle for a long period of time (for details about warm-up
operations, see Section 5.4).
3) When the dust on the surface of the display affects the display effect, please use
water to blend a little neutral detergent and use a soft antistatic brush to clean the
display.
4) Check the parts in the distribution box quarterly. Check whether the power cables
and signal cables for the LED display are connected securely and safely, and
whether the display is grounded reliably.
5) Check whether the steel structure is secure on a yearly basis.