GHOST METER F
50
5.
DMM MEASUREMENT AND SETUP
5.1.
DC Voltage Measurement
CAUTION:
Do not measure DC voltages if a motor on the circuit is being
switched ON or OFF, Large voltage surges may occur that can damage the
meter
1.
Set the function switch to the
VDC
position.
2.
Insert the black test lead banana plug
into the negative
COM
jack.
3.
Insert the red test lead banana plug
into the positive
V
jack.
4.
Read the voltage in the display.
5.2.
AC+DC Voltage Measurement
CAUTION:
Do not measure DC voltages if a motor on the circuit is
being switched ON or OFF, Large voltage surges may occur that
can damage the meter.
1.
Set the function switch to the
VDC
position.
2.
Insert the black test lead banana plug
into the negative
COM
jack.
3.
Insert the red test lead banana plug
into the positive
V
jack.
4.
Press the
MODE/RANGE
Button to
switch the
Voltage
functions.
5.
Read the AC+DC
voltage in the
display.
