Unihedron SQM-LU-DL, Руководство оператора

Страница: 37 / 101

7.3 Operation
Press the “Correct .dat file” button to write the corrected file to disk. The location of the new file is shown in the
bottom Filename section.
Tools : .dat reconstruct local time
If the datalogger timezone was not set properly, This tool can be used to recreate the local time values in the .dat file.
Figure 7.16: Tool : .dat local time reconstruction
Select the desired .dat file to reconstruct.
Select the proper region and time zone.
Press the “Reconstruct .dat local times” button
The reconstructed file will be written to disk at the location specified in the bottom Filename section.
Tools : .dat time correction
If the real-time-clock inside the datalogger was not set properly or the battery was not plugged into the datalogger quickly
enough to keep the super-capacitor charged before datalogging began, then there would be a difference in time when the
data was retrieved. The .dat file can be corrected with this tool.
Unihedron SQM-LU-DL Operator’s Manual -
20220119
37