Unigas PBY70, Руководство по установке, использованию и обслуживанию, Страница: 22 / 44

C.I.B. UNIGAS - M039241CB
22
Connecting the oil flexible hoses to the pump
To connect the flexible oil hoses to the pump, proceed as follows, according to the pump provided:
1 remove the closing nuts A (on the pump inlet) and B (from pump to the burner);
2 screw the rotating nut of the two flexible hoses on the pump being careful to avoid exchanging the lines : see the arrows marked
on the pump.
Connecting the oil flexible hoses to the burner
To connect the flexible oil hoses to the pump, proceed as follows, according to the pump provided:
1 remove the closing nuts A (on the heater) and R (on the oil pressure governor);
2 screw the rotating nut of the two flexible hoses on the burner being careful to avoid exchanging the inlet and return lines : see
the arrows marked that show the inlet and the return.
Connecting the compressed air hoses
To connect the compressed air supply, refer to the following pictures
A B
A
R
Compressed air governor