48
Menu Operation
Settings
Sound and Alert Settings
Adjust the Ringer Volume
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Volume”.
5. Use the Navigation key to adjust the volume. Press “OK” to save the setting.
Set different Ring Signals for Internal Call, External Call and Call Back
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Ring signals”.
5. Different signals for internal calls, external calls, and call back can be set. Select “Internal call”,
“External call”, or “Callback”. The handset has 15 different ring signals.
6. Select sound using “Select”. By pressing “Play”, you can listen to the different sounds. Use
“Stop” to stop listening.
7. Press “Back”.
Set Alert for Messages
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Message alert”.
5. Select between 10 different message alerts from list. By pressing “Play”, you can listen to the
different alerts.
6. Press “Back”.
TIP: By default, the message volume follows the ring volume setting, but you can set a different
message volume in the handset. Please contact your administrator to get support.
Turn the Vibrator on/off
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Vibrating alert”.
5. Select “On”, “On if silent” (that is, the vibrator is on when the handset is muted), or “Off”
6. Press “Back”.
It is also possible to adjust the ringer volume with the volume buttons in idle mode. If a hand-
set restriction is enabled, it might not be possible to set the ring volume to “Silent”.
The “Play” soft key is not available for Enhanced beeps. Instead, send a message to the
handset to listen to the sound.
