manualshive.com logo in svg

Unify OpenStage WL 3, Руководство пользователя, Страница: 72 / 132

Поделиться
Скачать
Unify OpenStage WL 3 Скачать руководство пользователя страница 72

Menu Operation

c10_WL3.fm

Contacts

 A31003-M2000-U107-1-7619, 1/2017

72

WL3 and WL3 Plus WLAN Handset, User Manual

   

   

  

10.1.4  Call Services

10.1.4.1  Do Not Disturb

1. Enter the menu by pressing the “Menu” soft key.

2. Select “Calls” 

 in the menu.

3. Press “Select”.

4. Select “Call services”.

5. Press “Select”.

6. Select “Do not disturb”.

7. Press “Select”.

8. Select “On”.

9. Press “Back” repeatedly until the idle screen appears. 

The text “Do not disturb” remains on the idle screen as long as the function is 
active. Calls are rejected and indicated as missed calls. The calling party gets 
the message “Temporarily unavailable”.

To deactivate the function, follow the same steps and select “Off”.

10.2  Contacts

The handset has a local phonebook with 250 entries, where names and numbers 
freely can be added, deleted, and edited by the user. The phonebook lists all 
names in alphabetical order (language dependent), where three numbers can be 
added for each contact; work number, mobile number, and other number.

In addition, a company phonebook with up to 1000 entries can be downloaded to 
the handset via the WinPDM/Device Manager. The company phonebook names 
and numbers can not be edited or deleted by the user. The phonebook lists all 
names in alphabetical order. The local and company phonebook appears in the 
same list, but the company contacts are indicated by a “Locked entry” icon , which 
means that they cannot be edited. The contacts only include the work number. 
The local phonebook and central phonebook together have up to 1250 entries. 
See 

6.2.7 Dial a Number from the Company Phonebook 

on page 52.

It is also possible to access a central phonebook

1

, see 

6.2.8 Dial a Name from the 

Central Phonebook 

on page 52, or 

10.2.5 Central Phonebook 

on page 75.

1. This function is system dependent.

Содержание OpenStage WL 3





































































































































Отзывы:

Нет отзывов