Configuration and activation
A31003-M2000-M103-2-76A9, 07/2014
3-15
Alarm and Emergency Call Configuration, Administrator Documentation
SHB_PNG-Konfig.fm
Configuration menu
Furthermore, the handset checks whether the battery is sufficiently charged. If the battery is
not adequately charged, a technical fault is likewise reported. No settings can be made here.
Procedure:
1.
Select the
Additional Features
icon in the main menu.
2.
Select
Configuration
.
3.
Enter the five-position service PIN and confirm with
OK
.
4.
Select one of the three operating modes.
5.
Select
Techn. Warning
.
6.
Change the values of the following parameters:
Table 3-13
Parameter – Techn. Warning
Parameters
Operating Mode
Value Range
Standard Value
Activation
BM/AM/PNG
On/off
On
DPS Request Time
BM/AM/PNG
0 min ... 120 min
2 min
Out of range time
BM/AM/PNG
0 min ... 120 min
2 min
Warning Signal
BM/AM/PNG
On/off
On
Melodies
BM/AM/PNG
Alarm 1 ... 5
Alarm 1
Volume
BM/AM/PNG
1 ... 5
3
7.
Confirm with
Save
.
3.2.1.5
Adjust Sensor
A complete check and adjustment of the alarm sensors is performed in this menu.
When Alarm Mode and PNG Mode are activated, the sensors for the activated alarms are
checked, with the check being started automatically when the mode is activated. No sensor
check is started automatically in Basic Mode by activating the mode.
Procedure:
1.
Select the
Additional Features
icon in the main menu.
2.
Select
Configuration
.
3.
Enter the five-position service PIN and confirm with
OK
.
4.
Select one of the three operating modes.
5.
Select
Adjust Sensor
.