SHB_PNG-Konfig.fm
A31003-M2000-M103-2-76A9, 07/2014
Alarm and Emergency Call Configuration, Administrator Documentation
3-14
Configuration and activation
Configuration menu
Control Ports in Basic Mode:
Table 3-11
Parameter – Control Ports in Basic Mode
Parameters
Sample Value
Value
Activ. Availability
(up to 32 digits)
(blank)
Availability NOK
(up to 32 digits)
(blank)
Stop Availability
(up to 32 digits)
(blank)
Control Ports in Alarm/PNG Mode
Table 3-12
Parameter – Control Ports in Alarm/PNG Mode
Parameters
Sample Value
Value
Start Monitoring
(up to 32 digits)
(blank)
Monitoring NOK
(up to 32 digits)
(blank)
Monitoring Off
(up to 32 digits)
(blank)
Alarm Recall-loud
(up to 32 digits)
(blank)
Alarm Recall-quiet
(up to 32 digits)
(blank)
Alarm Recall
(up to 32 digits)
(blank)
7.
Confirm with
Save
.
3.2.1.4
Techn. Warning
>
The DPS function is only supported for operation on a HiPath 4000.
In case of a technical warning, the handset signals the fault to the user, which the user can reset
with
OK
.
The maximum permitted time without a DPS request and the maximum permitted Out of range
time can be configured. If the time is exceeded, the warning is triggered. The value 0 disables
the respective check.
A DPS request is sent to the handset from the alarm server in order to check the availability of
the mobile user.
Reception is necessary for voice and data communication between the handset and base
stations. If there is no reception, communication is not possible.