124
Using team functions
Using team functions
If configured (consult your administrator), your telephone is part of a team. The
team consists of internal phones that are able to use certain functions.
Activating/deactivating a group call
If configured (consult your administrator), you belong to one or more groups of
stations, which can be reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt group) or simultaneously
(= group call) on all phones in the group, until a group member answers the call.
You can also belong to a team (including executive/secretary configurations) in
which station numbers are programmed on trunk keys
Every group member can still be reached at his or her personal phone number.
You can activate and deactivate the audible signal for a hunt group, group call
or individual trunks in a group (including executive/secretary).
If the LED on a programmed "Group call" key is illuminated
Page 78, this
means that the audible tone was activated for at least one group.
c
Open the idle menu
Select and confirm the option shown
1
.
or
Select and confirm the option shown.
or
S
or
R
Press the "Group call" key.
This function is not available for the executive phone in team/executive/
secretary configurations.
Special features must be taken into consideration if your telephone
operates with system networking via LAN
Leave group
1.
”Differing display views in a HiPath 4000 environment”
Join group
