72
More functions/services
Controlling relays (only for
HiPath 3000
and
OpenScape Business
)
If this function has been configured (consult your administrator), you can use up
to four relays to enable/disable different devices (such as a door opener).
Depending on how you program the relays, you can activate and deactivate
them manually or configure them to activate and deactivate automatically (after
timeout).
Select and confirm the option shown.
or
Select and confirm the option shown.
1
...
4
Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (consult your administrator), sensors are able to recognize signals,
call your phone and display an appropriate message on the screen.
Paging persons (not for U.S.)
If radio paging equipment (PSE) is connected to your system (consult your
administrator), you can locate people via their pocket receivers.
Pocket receivers signal a call request to the person you want to page. This
person can then answer the page at the nearest phone.
Paging persons
To ensure that you can be found, you must have enabled a ringing group
Æ
Page 81, call forwarding
Æ
Page 27 or call forwarding-no answer (service
engineer) to the internal station number of your PSE.
A call request is signaled automatically.
Answering the page from the nearest telephone
^
Lift the handset.
)59
Enter the code.
j
Enter own station number.
Special features must be taken into consideration if your telephone
operates with system networking via the PC network
Æ
Page 88!
*90=Control relay on?
#90=Control relay off?