P31003C1020M1000276A9, 01/2018
12
OpenScape Cordless IP V2, Administrator Documentation
First steps
Defining the device role
2.4 Defining the device role
On delivery all OpenScape Cordless IP V2 devices are configured as base station. To set up the DECT multicell
system at least one device must be configured as Integrator/DECT manager. Detailed information on device roles:
You use the device button on the front side to change the role of the device. The following settings are possible:
base station, Integrator/DECT manager with dynamic IP address, Integrator/DECT manager with fixed IP settings.
Press the device button for at least 10 seconds until all LEDs switch off. Release the button . . . the device
is now in programming mode.
Select the device role by pressing the device button.
Integrator/DECT manager with dynamic IP settings
:
Short press the device button until both LEDs light blue. . . . The IP address will be
assigned by a DHCP server in your network.
Integrator/DECT manager with fixed IP settings
:
Short press the device button until the right LED lights blue. . . . The following IP settings
are set:
Base station
:
Short press the device button until the right LED lights green.
Once the desired role is selected:
Press the device button at least three seconds but less than 10 seconds . . . the previously selected role is
assigned to the device . . . the device is reset and rebooted.
2.5 Wall mounting
BSIP2 is intended for wall mounting. After connecting the LAN cable and setting the device role you can place it
to the destined location.
In case you connect other external antenna models or types please take care that the maximum
allowed transmission power is not exceeded. If in doubt, you can lower the transmitting power by the
web interface option
Reduce TX power by 8dB for external antenna operation
for this device (
p. 30).
IP address:
192.168.143.1
Subnet mask:
255.255.0.0
When changing the device role the system is reset to factory setting. This means, that existing
configuration and user data will be lost.
