UniFlow microMIND V2, Руководство по установке и настройке, Страница: 22 / 42

microMIND V2 Website
The microMIND V2 has a built-in web server. It provides the following websites:
▪ microMIND ▪
▪ USB Device
▪
▪ Port Configuration
▪
▪ About
▪
The websites can either be reached by clicking on the respective microMIND List view
entry of the Connections > Agents/Terminals > MIND & microMIND > List view site of
the uniFLOW Server Configuration, or via http://<microMIND-IP>/mind.shtml.
microMIND
The microMIND site gives information about the following:
▪ Serial Number: ▪
This is the serial number of the microMIND V2 itself. It is used to select a microMIND
V2 during a printer configuration. You will also find this number on a sticker on the
back of each microMIND V2. The serial number is displayed in hexadecimal format
and reflects the last 3 Bytes of the device's MAC address.
▪ Software Version: ▪
The current firmware version of the microMIND V2.
▪ Network: ▪
Shows the IP address of the microMIND V2, the Subnet, Gateway address and
whether it is configured manually or via DHCP.
▪ Last ID (raw): ▪
Shows the last read card number without code conversion (raw data).
By default, the Last ID is not displayed for security reasons. However, you can enable
this via Telnet with the command SHOWID which toggles the Last ID (raw) display on
and off.
▪ Name: ▪
You can change the default name microMIND V2 for an easier identification of the
device itself, for example the name of the associated printer.
Since firmware version 2.0.6, the microMIND V2 name is also its DNS name. For that
reason, please ensure the name is RFC952 compliant. The following characters are
valid, whereas only 24 characters are allowed and the first character must be an
alphabetic character:
▪ 0...9 ▪
▪ a...z
▪
▪ A...Z
▪
▪ .
▪
10
microMIND V2 Website
6
6.1