UniFlow microMIND V2, Руководство по установке и настройке

Страница: 19 / 42

Configuration
The microMIND V2 works without any additional configuration if your network has a
DHCP server configured to provide an IP address for the microMIND V2. However, some
"advanced" options are available which are explained below.
Configurable Parameters
▪ A configuration of the microMIND V2 in a different network segment than the ▪
uniFLOW server is not possible. The reason is that the configuration requires
network broadcasts which are in general not forwarded between different network
segments. However, if your router configuration allows the forwarding of broadcasts
to a different segment, the configuration may be possible.
▪ This only affects changes of the microMIND V2 IP address configuration. The ▪
websites of the microMIND can of course be reached from any subnet and there is
also no further limitation.
▪ Furthermore, if there is no DHCP server available or if a DHCP server doesn't send ▪
any IP configuration to the microMIND V2, the microMIND V2 will appear on the
MIND & microMIND > List view page nevertheless.
Same is true for microMINDs which are set to a fixed IP, even if its IP does not match
the subnet mask.
IP Address
The IP configuration of the microMIND V2 is performed directly via uniFLOW.
To configure a microMIND V2 IP address, do the following:
1. Open the uniFLOW Server Configuration, choose the main menu Connections >
1.
Agents/Terminals > MIND & microMIND and select the List view page.
2. In this screen, you can see the status information of the attached MINDs / 2.
microMINDs / microMIND V2. The column Type shows you if it is a MIND (MindNet
Device) or a microMIND.
3. The microMIND V2 IP configuration can be found by selecting a microMIND V2 via 3.
mouse click on the IP address.
You’ll find the serial number of the respective microMIND V2 on a sticker on the back
of the microMIND V2. A browser screen will open to configure the microMIND V2 IP
address.
By default, the microMIND V2 is set to DHCP, meaning that the microMIND V2
receives it's configuration from the network's DHCP server if available.
If there is no DHCP server available or if a DHCP server doesn't send any IP
configuration to the microMIND V2, the microMIND V2 will appear on the MIND &
microMIND > List view page as well. This is because the microMIND V2 vendor MAC
address portion is known to the uniFLOW server.
7
Configuration
5
5.1