background image

OPERATING THE VS1600XR / VS2600XR

VEHICLE SECURITY SYSTEM

ARMING

The system 

ARMS 

by pressing your 

transmitter button 1 once

.  The red LED will begins

to flash once per second.  When the system arms, you will hear a short chirp and see the

parklights flash once.

NOTE

: If extra chirps are heard, refer to ZONE BYPASS.

PASSIVE ARMING

The system can be programmed to arm itself automatically.
With 

Passive Arming Selected

, the system will enter arming mode once ignition is

turned off and the last open door is closed.  During the 30 second delay period, you can

temporarily stop the arming by opening a door.  Upon closing the open door the delay

period will restart. A siren chirp and a parklight flash signifies that the alarm has entered

arming mode.  Passive arming is also indicated by rapid flashing of the red LED.

ZONE BYPASS

For cars with a faulty door switch or fading interior lights, the system can only be armed

through the transmitter.  Three siren chirps and parklight flashes indicate that the open

zone is bypassed and that the system has entered arm mode.

DISARMING

To disarm the alarm, press button #1.  The siren chirps twice, the parking lights flash

twice then turn steady ON for 6 seconds (or until you turn the ignition ON), and the LED

turns OFF.  What happens next depends on how your alarm is set (ask your dealer):

q

Alarm set for passive arming with security lock enable

The system will enter arming mode.  If a door is opened, the system is only temporar-

ily disarmed.  Closing the open door will again cause the system to re-enter arming

mode and relock the door.

q

Alarm set for passive arming with security lock disable

The system will enter arming mode.  If a door is opened, the system is only temporar-

ily disarmed.  Closing the open door will again cause the system to re-enter arming

mode and the door will not lock.

q

Alarm set for active arming with security lock disable

The alarm is now completely disarmed.

q

Alarm set for active arming with security lock enable

The system will enter arming mode.  If a door is opened, the system is permanently

disarmed.

TAMPER INDICATORS

If your alarm was triggered when you were away, the siren will chirp twice and the

indicator lights flash four times then turn ON for 6 seconds when you disarm your alarm.
These flashes automatically reset when the ignition is turned ON.

PATENTED STAY-SAFE DISARM

When your system is triggered, pressing 

transmitter button 1 

will only terminate the

alarm sound.  The system will remain armed and locked, therefore, continually protecting

your car.

Содержание VS1600XR

Страница 1: ... your car In addition opening a door or turning the ignition switch ON triggers the VS1600XR VS2600XR Vehicle Security System and siren or horn will sound What s more VS1600XR VS2600XR Vehicle Security System is equipped with the patented Rolling Code technology REMOTE CONTROL TRANSMITTER Rolling Code With the Rolling Code technology the alarm s RF code changes every time you press the remote cont...

Страница 2: ...n turn steady ON for 6 seconds or until you turn the ignition ON and the LED turns OFF What happens next depends on how your alarm is set ask your dealer q Alarm set for passive arming with security lock enable The system will enter arming mode If a door is opened the system is only temporar ily disarmed Closing the open door will again cause the system to re enter arming mode and relock the door ...

Страница 3: ...sec after siren will begin chirping 3 Wait for 1 chirp then release switch 4 Turn on ignition Siren will chirp once signifying that the system has entered valet mode To exit valet repeat the above procedures Instead of hearing 1 chirp in step 4 exit valet will be indicated by 2 siren chirps PANIC MODE In times of emergency the system can be forced into trigger mode siren sounding and parklights fl...

Страница 4: ...r Changing Security Code ensures higher level of security which is essential in performing emergency disarm and learning new transmitters 1 With the alarm in disarm mode turn ignition switch ON then OFF 2 Press transmitter button 2 twice The siren will long chirp 3 Turn ignition switch ON 4 Enter new first security code number via over ride switch Choose from 1 to 255 5 Turn ignition switch OFF 6 ...

Отзывы: