UIP200 User's Manual
Page 24 of 27
Rev. 1.0, © UAC, May, 2004
Step 2: Highlight the
Speed Dial
sub-menu and press
MENU
again.
Step 3: Highlight the
1-Touch Dial
sub-menu and press
MENU
.
Step 4: Press the unused 1-touch dial key you wish to program.
Step 5: The phone will prompt you to enter a phone number. Enter a maximum of 32
digits. If you wish to eliminate the four-second delay before dialing, press the
DIAL
key at the end of the phone number. Press the
CANCEL
key at anytime to
clear the entered digits and return to the
1-Touch Dial
sub-menu.
Step 6: After entering the phone number, press
MENU
. You will hear a long beep, and the
phone number is stored.
Clearing or Editing the 1-Touch Number
Step 1: Enter the
1-Touch Dial
sub-menu as describe above.
Step 2: Press the already-programmed 1-touch dial key you wish to clear or edit.
Step 3: If you want to edit the phone number, change the number and press the
MENU
key. If you want to clear the phone number, simply press the
MENU
key without
editing the phone number.
Step 4: You will hear a long beep confirming your changes to the 1-touch dial key.
Programming the 2 Touch Number
Step 1: Press the
MENU
key to enter the
Setup
menu
Step 2: Highlight the
Speed Dial
sub-menu and press
MENU
again.
Step 3: Scroll down to highlight the
2-Touch Dial
sub-menu and press
MENU
.
Step 4: Press the 2-touch dial key (default is programmable key 6) and then press the dial
key (
0-9
) you wish to program.
Step 5: The phone will prompt you to enter a phone number. Enter a maximum of 32
digits. If you wise to eliminate the four-second pause before dialing, press the
DIAL
key at the end of the phone number. Press the
CANCEL
key at anytime to
clear the entered digits and return to the
2-Touch Dial
sub-menu.
Step 6: After entering the phone number, press
MENU
. You will hear a long beep, and the
phone number is stored.