Uniden UH7740NB, Руководство пользователя

Страница: 20 / 40

Operation
20 UNIDEN UH7740NB UH7750NB UHF CB Transceiver
Programming the Instant Priority Channel
Turn the Rotary Channel Selector at the base or press
on the Remote SPK/MIC to select the Priority Channel you
prefer.
Press and hold
[INST] button on the microphone for 3
seconds to store the new setting. INST icon appears.
Recalling the Instant Channel
Momentarily press the [INST] button on the microphone at
any time to return to the Instant Channel.
Transmitting
The UHF CB Radio uses the UHF-CB Channels.
NOTE
For your reference a list of the available channels, corresponding
frequencies and guidelines for their use and selection is printed on p.31 -
p.33. For Australia, Channels 05 and 35 are reserved for Emergency Calls.
Select the desired channel. Press the microphone’s [PTT] button and speak normally
into the microphone. Hold it approx. 7cm from your mouth. Release the [PTT] button to
end the transmission and listen for a reply.
Call Function
Press the microphone [CALL] Button. A three second ringing tone
will be transmitted.
You may select from 5 types of tones (see p.26).
NOTE
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted within
one minute then an error tone will sound.
DUAL Watch
Dual watch monitors the current channel and the Instant channel. (See Programming
the Instant Priority Channel above).
Press
[DUAL/MON]
on the base or press and hold
[DCS/CTCSS/DUAL]
on the
Remote SPK/MIC. DUAL icon appears and a short tone beep is heard.
To cancel DUAL Watch press
[DUAL/MON]
on the base or press and hold
[DCS/CTCSS/DUAL] on the Remote SPK/MIC. DUAL icon disappears.
PTT
CALL INST