Uniden UH7740NB, Руководство пользователя

Страница: 18 / 40

Operation
18 UNIDEN UH7740NB UH7750NB UHF CB Transceiver
Setting the Auto Squelch
The Auto Squelch feature is available only when the
optional Remote SPK/MIC is connected. It has an Off
setting and 3 preset squelch levels:
oFF - Auto Squelch OFF
1 - max sensitivity (min squelch)
2 - med sensitivity (med squelch)
3 - min sensitivity (max/tight squelch)
It requires no adjustment.
1. Press
[SQL/MON] on the Remote SPK/MIC. The squelch setting flashes.
2. Rotate the channel knob at the base or press on the Remote SPK/MIC to
change the setting. RSQ icon displays when Auto Squelch is active. If tight squelch
is selected SQT icon will also flash.
3. Press [MENU/ENTER] to store the setting.
Think of the squelch control
as a gate. If you turn Squelch
fully clockwise it raises the
‘Squelch gate’ so high that no
signals get through.
Think of the squelch control
as a gate. If you turn Squelch
fully clockwise it raises the
‘Squelch gate’ so high that no
signals get through.
To set the ‘Squelch Gate’
to the desired level,
turn the squelch knob
counterclockwise until you
hear noise. Then carefully
turn the Squelch knob
clockwise until the noise
fades. Now only strong
signals get through.
Setting the Manual Squelch
Turn the outer ring of the SQ control at the base to adjust the Squelch.
NOTE
You must select a channel which is not in use before setting the
SQUELCH control. (see p.19 for “Selecting a Channel”).