Uniden HomePatrol-2, Руководство пользователя, Страница: 31 / 46

Using HomePatrol-2 with an Accessory GPS Receiver
Teaming HomePatrol-2 with a GPS receiver, such as Uniden’s BC-GPSK lets you conSnually monitor
channels along your route as well as stay aware of events in your current area. As you travel from place
to place, HomePatrol-2 uses the locaSon informaSon provided by the GPS and selects channels to match
your locaSon. You can decide whether HomePatrol-2 will use or ignore GPS input.
Tap and hold GPS on the Radio Control bar to display the Set Up GPS screen. This screen lets you set
your coordinates’ display format, change your GPS Baud Rate, and indicate GPS status.
Connecting Your GPS to HomePatrol-2
NOTE: Uniden’s GPS Accessory Cable (BWZG1844001) is required to connect an accessory GPS receiver
to HomePatrol.
•
Connect HomePatrol-2 to the GPS receiver’s serial port.
•
Once the GPS receiver acquires satellite signals and determines its locaSon, it starts providing
valid locaSon data to your HomePatrol-2 and the
GPS Detected screen displays. Tap Use GPS if
you want your GPS device to automaScally enable/disable channels based on the current
locaSon. Tap
Ignore GPS if you want to conSnue using the last set locaSon.
•
HomePatrol-2 selects channels and begins monitoring transmissions.
•
Note: The channel selecSon process occurs in the background. The only Sme you will noSce a
database change is when you approach a state border.
Setting Up GPS
Tapping GPS LocaAon from the Set Your LocaAon (or tap and hold the GPS bueon on the Radio Control
bar) menu allows you to set HomePatrol-2 formats to match your GPS:
•
LocaSon format. DD.dddd (Decimal Degrees) or DMS (Degrees Minutes Seconds) are two
different ways of presenSng laStude and longitude. (Default – DD.dddd)
•
GPS Baud Rate
4800 (normal se]ng, default)
9600
19200
38400
57600
115200
•
“Ignore GPS” selector. If you have a GPS system in operaSon, you can set HomePatrol-2 to ignore
GPS input and it will focus on transmissions from the last locaSon set. Otherwise, HomePatrol-2
will conSnually update locaSon based on GPS input.
NOTE: The third row of the GPS LocaHon screen will show the status of a connected GPS.
23