manualshive.com logo in svg
background image

Thank you for choosing the Uniden EXS 2010 cordless telephone. 
This phone is designed for reliability, long life, and outstanding
performance utilizing the latest in 900 MHz Digital Spread Spectrum
technology.

Note: Some illustrations in this manual may differ from the 

actual unit for explanation purposes.

• 900 MHz Digital Spread Spectrum Technology
• 10 Memory Dial Locations
• 32 Digit Redial
• Flash and Pause
• Pulse / Tone Dialing
• Page
• 6 Hour Talk Time
• 10 Day Standby Time
• Handset Earpiece and Ringer Volume Controls
• Hearing Aid Compatible
• Lighted Keypad
• Headset Compatible

Digital Spread Spectrum Technology

utilizes a “wider

frequency band” vs. a “single narrow band” used in standard
digital transmissions. The result is a more secure conversation
with the clarity of digital sound, extended range, and minimal
interference from other cordless phone.

Random Code™

digital security automatically selects one of

over 65,000 codes for the handset and base.

These features enhance your phone’s security and also
prevent unauthorized calls as a result of your phone being
activated by other equipment.

The EXS 2010 features include 

AutoTalk

TM

and 

AutoStandby

TM

AutoTalk allows you to answer a call by just removing the
handset from the base so you don’t have to waste time
pushing buttons or flipping switches. AutoStandby allows you
hang up by simply returning the handset to the base.

Features

Introduction

INTRODUCTION

TO YOUR NEW PHONE

EXS 2010  6/28/00  4:36 PM  Page 1

Содержание EXS 2010





























Отзывы: