Model APX 142
Desktop Rapid Charger
Model APX 143
Desktop Standard Charger
OPERATING GUIDE
7100 Technology Drive
West Melbourne, FL 32904
©2000 RELM Wireless Corporation. All Rights Reserved
UEZZ01321ZZ
W I R E L E S S C O R P O R A T I O N
Introduction
The APX 142 Rapid Char
ger and the APX 143 Standard
Charger are used to char
ge APX1
120 Battery Packs for Uniden
transceivers. Both chargers are for desktop use.
Y ou can char
ge
the battery pack while it is in the transceiver or insert the
battery pack and battery cover in the charger
.
These efficient char
gers feature the latest technology. The
Model APX l 42 Rapid Char
ger quickly charges a battery
pack. Both chargers feature a short circuit protector that
assures safety and permits you to leave the battery or trans-
ceiver with battery in the charger for long periods.
AC Adapters
Check to verify that the AC
Adapter matches your T
ransceiver
Battery Pack
•
APX l 42 Rapid Charger uses
Adapter APX 141PS
•
APX 143 Standard Charger uses
Adapter APX 140PS
Features
Auto charging
- simply place the transceiver or battery pack/
battery cover assembly in the charger pocket.
Overcharge protection
- prevents accidental overcharging of
the battery pack.
LED indicator
- red light indicates charging; green light
indicates battery is fully charged.
Custom pocket design
- the charging pocket is shaped to
snugly hold the transceiver, assuring that the battery makes
good contact with the charging contacts.
Battery Charging Information
•
Do not operate the transceiver while it is charging; this
might cause a malfunction.
•
Remove the battery pack from the transceiver when it
is not used for a long period.
•
Do not let the battery pack discharge completely - this
shortens the battery pack life considerably.
1
2
