WirelessIP 5000 User Guide
Accessory
Unidata Communication Systems Inc. Page
8
5.4 USB Cable
The USB Cable as shown in
Figure 4
, connects your phone to the PC, enables you to either configure or to
change the phone. When configuring the phone, make sure that your PC and the phone are connected
directly to each other by the USB cable.
5.5 Inserting Battery
Place the battery into the battery bay on the back side of the phone and push up towards the release button
until it clicks.
5.6 Releasing Battery
Take the battery off from the phone by pressing the release button and pull out the battery towards the
bottom of the phone.
Figure 4.
USB Cable
Note
: For more information about releasing battery, refer to page 10.
Содержание WirelessIP 5000
Страница 1: ......