FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 35
Version 1.3 / December 2018
9.1.8 Ethernet
figure 23 - System [Ethernet]
SETTING
DESCRIPTIoN
VALUE
Server IP address
Specifies the address of the server that is used
by an external card system (if it’s permitted), on
which the credits of all the cards are stored. If the
external card system is not permitted, this setting
is meaningless.
4 numbers 0...255
Server port
Specifies the port of the server that is used by an
external card system (if it’s permitted), on which
the credits of all the cards are stored. If the ex-
ternal card system is not permitted, this setting is
meaningless.
Credit control protocol
-
Permits/forbids
the credit control protocol,
which may be used for, e.g., the integration of the
vending machine to the filling stations POS ma-
chine software.
-
Enabled
– enables the protocol, permitting ac-
cruing the credit/free-giving out the product via
Ethernet.
Disabled /
Enabled
Credit protocol secret code
Sets a secret key, with the aid of which the soft-
ware for accruing the credit via Ethernet passes
authorization. If in the - Credit control protocol the
credit control protocol is permitted, then this set-
ting should match the setting in the filling station
POS machine software (if this software accrues
the credit rather than controls the sales via a vir-
tual reader). If the protocol in the Credit control
protocol setting is forbidden (or this POS software
is not using the possibility to accrue the credit),
this setting is meaningless.
Code entry
