Command and Log Reference
70
The antenna status output ASCII and abbreviated ASCII in the Unicore ASCII
format, in the sequence of the above binary number, output in packages splited by “,”.
8.5
Saveconfig Save current configuration into NVM
This command used to save current user configuration into non-volatile memory
(NVM), including LOG (except logs with ONCE trigger), port configuration, etc.
Abbreviated ASCII Syntax:
SAVECONFIG
Table 8-6: Saveconfig Command
ID
Field
Description
1
SAVECONFIG
header
Save all the present configurations in receiver’s non-
volatile memory
9.
RTCM V2 Standard Logs
RTCM1 Differential GPS Corrections
RTCM3 Base Station parameters
RTCM9 Partial Difference GPS Corrections
RTCM1819 Raw Measurements Without Corrected
RTCM24 Antenna ReferencePoint
RTCM31 Differential GLONASS Corrections
RTCM32 GLONAS Base Station parameters
RTCM41 Multi-System Differential Corrections
（
RTCM v2.4
）
RTCM42 Partial Multi-System Differential Corrections
（
RTCM v2.4
）
Recommend Input:
RTCM1819 COM2 1
9.1
RTCM V3 Standard Logs
The RTCM SC-104 Type 3 standards recommended by the RTCM Special
Committee, consists primarily of Version 3.0 and Version 3.2. Refer to the
http://www.rtcm.org/overview.php
RTCM V3:
Group 1 -Observations:
RTCM1001 L1-Only GPS RTK Observables
RTCM1002 Extended L1-Only GPS RTK Observables
RTCM1004 Extended L1 and L2 GPS RTK Observables
RTCM1009 GLONASS L1-Only RTK
