UM620N User Manual
UC-00-M30 EN R1.0
Product Installation
5
2
Product Installation
2.1
Preparations
UM620N modules are Electrostatic Sensitive Devices (ESD) and must be installed with
special precautions when handling. Please follow the instructions below before opening
the anti-static plastic box.
1)
Follow the steps in section 2.2 in the correct order.
2)
Electrostatic discharge (ESD) may cause damage to the device. All operations
mentioned in this chapter should be performed on an antistatic workbench, using
an antistatic wristband and a conductive foam pad. If the antistatic workbench is
not available, wear an antistatic wrist strap and connect the other end to a metal
frame to play the anti-static role.
3)
Hold the edge of the module, and DO NOT touch any components of the module.
4)
Please check carefully whether the module is obviously loose or damaged. If there
are any problems, please contact Unicore or the local dealer.
Figure 2-1 shows the typical installation of UM620N evaluation kit (EVK).
Antenna
PC
UM620N EVK
Figure 2-1 Typical Installation of UM620N
Please prepare the following items before installing UM620N.
UM620N EVK (with AC Adapter)
UM620N User Manual
Unicore uSTAR software package
Ancillary GNSS antenna
USB cable and straight through serial cable
