6
Product Installation
UC-00-M30 EN R1.0
PC or Laptop with serial ports (Windows 7 and above)
Please keep the packing box and anti-static plastic box for storage and handling.
2.2
Hardware Installation
After the above preparations, please follow the steps below to install the module, which
is only for satellite navigation test.
Step 1: Make sure to take full anti-static measures, such as wearing an anti-static wrist
strap and grounding the workbench.
Step 2: Open the UM620N evaluation kit and take out the evaluation board.
Step 3: Use the GNSS antenna with appropriate gain and fix it in a non-blocking area;
use the appropriate cable to connect the antenna with UM620N evaluation board.
Step 4: Connect a PC to the EVK serial port through the USB cable or straight through
serial cable.
Step 5: Open uSTAR software on the PC.
Step 6: Control the receiver through uSTAR to display constellations view, log messages,
and receiver status, etc.
