UC6580 EVK User Manual
UC-08-C43 EN R1.0
Positioning and Power Consumption Test
7
4
Positioning and Power Consumption Test
4.1
Positioning Test
1.
Connect the GNSS antenna to the interface J4 on the adapter and fix the
antenna in a
non-occluded area
.
2.
Connect the EVK to the PC through the USB interface. Then the power indicator
is on.
3.
Start the UPrecise on the PC, select the correct port and baud rate 115200 to
make sure the receiver is connected.
Then the positioning related information appears on the screen, and in the
situation of open sky, the CN0 is normally above 40. Refer to
UPrecise User
Manual
for more details.
Figure 4-1 Connecting EVK to PC
