Coaxial/Fiber Optic
Video Converter
Installation Guide
VAA-FMT1-TR
SPECIFICATIONS
Interface Transmitter:
1 x BNC (Female) / Input Signal
1 x ST for single / Output Signal
Receiver:
1 x BNC (Female) / Output Signal
1 x ST for single / Input Signal
Bandwidth:
DC to 12 MHz
Impedance:
75 Ohm.
Input Signal Range:
1V<V
p-p
<2.4V
Signal-to-Noise Ratio:
≥
60dB
Output Signal Range:
480mV<V
p-p
<1.1V
System Bandwidth:
8MHz
Transmission Loss:
Max. 13dB
Power Supply:
DC 9V 1Amp
Distance:
Maximum length 2.5km
Cable Type:
62.5/125um Multi-Mode fiber cable
Wave Length:
850nm
Enclosure:
Aluminum Case
Dimensions: 2.2” (W) x
4.15
” (L) x 0.8” (H)
VAA-FMT1-TR
Video/Fiber Optic Converter, ST/Multi-
Mode, Kit with Transmitter and Receiver
VAA-FMT1-T
Video/Fiber Optic Converter, ST/Multi-
Mode, Transmitter
VAA-FMT1-R
Video/Fiber Optic Converter, ST/Multi-
Mode, Receiver
ORDERING INFORMATION
©UNICOM 2003. UNICOM is a trademark of UNICOM Electric, Inc. All rights reserved.
Specifications subject to change without notice.
908 Canada Court
City of Industry, CA 91748 U.S.A.
Phone:
626.964.7873 or 800.346.6668
Fax:
626.964.7880
www.unicomlink.com
e-mail: [email protected]
Coax/fiber Vid Convert Manual 3/4/03 4:20 PM Page 1
