Unical TOUCH SCREEN N, Руководство пользователя и инсталлятора

Страница: 9 / 44

Touch Screen
9
Figure 6. Home screen – only chiller is networked
Figure 7. Chiller/Heat Pump
Referring to the above figure, it is possible to obtain the following information:
•
presence of chillers that are connected in the network (the chiller is correctly accepted when touching its figure you can access to
the pages dedicated to itself);
• operating mode of the chiller (winter , summer , sanitary , OFF if any of the previous icons appears on the screen);
• operating status of the chiller (compressor running): the operation of the chiller shows graphically by the rotation of the fans ).
Furthermore, the first home page can provide directly the following information, referreing to fancoil units:
• Presence of fancoil unis that are connected to the network, if the fancoil symbol appears on the display (Figure 8. Fancoil
units connected to the network.);
• Fancoil units in dehumidification mode, if the symbol of the drops on the fan coil appears on the display (Figure 9. Fancoil
units in dehumidification mode.).
Figure 8. Fancoil units connected to the network
Figure 9. Fancoil units in dehumidification mode
3.4.1 CHILLER SCREEN/HEAT PUMP
From the main page, by pressing the chiller symbol (sensitive area number 1, Figure 5. Home page – indication meanings), you can
access to the chiller page on network screen.
From here you can access to the information related to the operations of the chiller; then you can uniquely identify each chiller
present by giving them names.