Unical TOUCH SCREEN N, Руководство пользователя и инсталлятора

Страница: 17 / 44

Touch Screen
17
From this screen you can set the chiller’s parameters and also configurate the fancoil zones. If enabled, you can also set the sanitary
hot water setpoint (see Paragraph 4.7.3) and for rapid DHW preparator, the second set-point (see Paragraph 4.10) and the offset for
the climatic compensation (see Paragraph 4.11). It is also possible to set the set during use as a room thermostat.
3.6.3 PROGRAMS PAGE (CHRONOTHERMOSTAT)
Press the button to enter into “ Programs ” page.
Figure 19. “Programs” page
From this page you can set separately the weekly program of each chiller and zones of fancoils. You can also program the
legionella’s cycle and the production of hot water, if enabled (see Paragraph 4.7.4).
3.6.4 SPECIAL FUNCTIONS PAGE
Press the button to enter into " Special Functions " page (see Paragraph 4.14).
3.6.5 CONFIGURATION PAGE
Press the button to enter into " Configuration " page.
Figure 20. “Configuration” page
From the configuration screen, you can access to the User-Setup menu, to the service menu and to the manufacturer menu.
Press on each of these items; it will appear a numeric keypad for entering a password.
Figure 21. Password entry
The user password is set by default to "0" (modifiable).