Unical TOUCH SCREEN N, Руководство пользователя и инсталлятора

Страница: 10 / 44

Touch Screen
10
Figure 10. Chiller page – information and sensitive areas
The information in the chiller’s page are:
1. Temperature detected by chillers (for a specific chiller):
a. Air temperature (°C)
b. Inlet water temperature (°C)
c. Outlet water temperature (°C)
2. Status and operation mode for a specific chiller
3. Active/activable functions (in the scroll bar on the left side of the sceen)
Sensitive areas (indicated by red boxes in the figure) in this page are:
4. Chiller name (each time you press on it, you go to the next chiller installed in the network; otherwise, with a long press, you
can rename the chiller)
5. Chiller/heat pump (with working signalling function given by the rotation of the fans); from here you access to an additional
page of information about that specific chiller.
6.
Active alarms of the dispèlayed unit
7. Icons of the navigation sidebar
8. Icons of the navigation sidebar
9.
Icons of the navigation sidebar
3.4.1.1 ASSIGNMENT OF NAMES TO THE CHILLERS
For the assignment of a name to given chiller, you must navigate between the pages of the chillers that are connected in the
network until you get the page of the specific one that you want to change its name: for this purpose, you have to make a long press
on the sensitive area 4 . Once you find the chiller, press and hold for a few seconds in the same area 4. Then compose with the
keyboard that appears the desired name.
5
3
7
4
1
2
6
8
9