background image

16

Installation instructions

3.9 - ASSEMBLY 
 INSTRUCTIONS

Fan assembly

Fit the fan to the smoke chamber.

fig. 11

fig. 12

IMPORTANT!

Before installing the fan, check the perfect 
tightness of the bypass cover which links the 
wood storage directly with the smoke chamber.
To do this, with the wood loading door open, act 

manually on the control rod of the bypass simulating closing of 
the door and make sure there is no gap.
If so, adjust the length of the rod.
Mount the bottom closing cover of smoke chamber with the 
relative seal.
Wood must be loaded in as little time as possible to keep the 
impeller of the fan from overheating and thus malfunctioning.
This problem occurs more quickly the more the wood loading 
door is opened.

Assembling the handles

-  Mount the screw and nut on the top door and screw the knob 

(pos. 1, 2, 3).

  Fit the knob (pos. 4) on the top door closing handle.
-  Mount the screw and nut on the bottom door and screw the 

knob (pos. 1, 2, 3).

-  Install the air manifolds (pos. 5).
  Adjustment of the primary and secondary air draughts 
  is described on page 43.  
-  Attach the flame control mirror (pos. 6) to the 
  sight glass on the bottom door.

4

1

1

2

2

3

3

6

5

Содержание AIREX 150





















































Отзывы: