UNIA TERIS XL H 4, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 30

OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
- 21 -
5.5 Brakes
Fig. 11. Air brake
•
Inspection and adjustment of the air brake system is to be carried out 2 times a year
before commencement of field work (machine operation) or after the operator has
determined that the braking force has been reduced
•
Adjust the braking force by reducing the cylinder idle stroke. Remove the pressure from
the brake system before proceeding, then disengage the fork
[A] from the arm [B] .
Unscrew the fork
[A]
towards the arm
[B]
. Reconnect the system.
CAUTION! THE SYSTEM IS PRESSURIZED
•
Perform any operations on a depressurized system.
•
Everyday maintenance consists of checking the air system tightness and visual
inspection of the air lines.
•
Replace any damaged components with new ones immediately.
•
Drain condensate from the air system at least 2 times a year, and especially before
winter. To do this, unscrew the drain plug
[1]
located at the bottom of the air tank
[2]
.
Replace the plug after draining condensate, and check the system tightness.
•
Clean the system filter as required,
however at least once a year.
Fig. 12.
Draining the system
•
For the safe operation of the compressed air valves, it is required that an anti-freeze agent
should be added to the system. Observe the tractor manufacturer’s recommendations.
•
Release the brake, and depressurize and drain the system before the winter storage.