Uni-Hydro PRO 56, Руководство пользователя

Страница: 14 / 73

PRO 56 Uni-Hydro Manual
TONNAGE CHART
APPROXIMATE PRESSURE FOR PUNCHING ROUND HOLE IN MILD STEEL
HOLE DIAMETER 3/16" 5/16" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/8" 1-1/4" 1-1/2"
THICKNESS
PRESSURE IN TONS
18 GA 0.5 0.7 1.6 1.9 2.1 2.4 2.6 2.8 3.1 3.3 3.5 3.8 4 4.2 5.6
16 GA 0.6 0.9 2.1 2.3 2.6 2.9 3.2 3.5 3.8 4.1 4.4 4.7 4.8 6 7
14 GA 0.7 1.2 2.6 2.9 3.3 3.7 4 4.4 4.8 5.1 5.5 5.9 5 7.2 10
12 GA 1 1.5 3.6 4.1 4.6 5.1 5.7 6.2 6.7 7.2 7.7 8.2 7 10 12
10 GA 1.3 2 4.6 5.3 5.9 6.6 7.3 7.9 8.6 9.2 9.9 10.6 10 13 15
5/32" * 2.3 5.4 6.1 6.9 7.7 8.4 9.2 10 10.7 11.5 12.3 11 16 19
3/16" * 2.8 6.4 7.4 8.3 9.2 10.1 11 12 12.9 13.8 14.8 17 19 23
1/4" * * 8.6 9.8 11.1 12.3 13.5 14.7 16 17.2 18.4 19.7 23 25 30
3/8" * * 12.8 14.8 16.5 18.5 20.2 22.1 23.8 25.8 27.5 29.5 33 38 45
1/2" * * * 19.7 22 24.6 26.9 29.5 31.8 34.4 36.8 39.4 45 50 60
5/8" * * * * * 30.8 33.7 36.9 39.9 43 46 49.2 56 63 75
3/4" * * * * * * * 44.3 47.7 51.7 55.2 59 68 75 90
1" * * * * * * * * * * * 80 90 100 120
* MATERIAL THICKNESS SHOULD NOT EXCEED PUNCH DIAMETER
** RATED 65,000 PSI TENSILE STRENGTH A36 MILD STEEL
Page - 10 -