Wire Colour
Function
Connect To
Red
Black
Yellow
Power
Ground
Pattern Selection
+12/24 VDC (Power)
-
(Ground)
+12/24 VDC (Power)
INSTALLATION MANUAL
E-915 Series LED Warning Lights
- Tap yellow wire to red wire (Power) momentarily to change patterns (see
Flash Patterns
)
- To return to pattern
NO. 1
, touch yellow wire to red wire (Power) quickly 3 times.
For more information, visit our website at: www.unibondlighting.com
Surface Mount: 2 Holes @ 4 ” centres •
Switch #1
ST307
(OFF-ON-Momentary ON)
Jumper Wires
From Battery Positive
Ground
Power
Pattern Selection
Battery Ground
Red
Yello
w
Blac
k
1.0
Pattern Selection
1.1
Flash Patterns
2.0
Suggested Switch Connection
(switches sold separately)
Light should be fused with 5 Amp Fuse (
ATM05 sold separately
)
NO.
Flash Patterns
SAE Class 1
1
2
3
4
5
6
Random Patterns
Alternating Single Flash
Alternating Double Flash
Alternating Quad Flash
Alternating Quint Flash
Alternating Quick Flash
7
8
9
10
11
12
13
14
15
16
17
18
19
Alternating Continuous High Intensity Flash
Alternating Single Flash / Quad Flash
Alternating Single Flash / High Intensity Flash
Simultaneous Single Flash
Simultaneous Double Flash
Simultaneous Quad Flash
Simultaneous Quint Flash
Simultaneous Quick Flash
Simultaneous High Intensity Flash
Simultaneous Single Flash / Quad Flash
Simultaneous Single Flash / High Intensity Flash
Steady Light on 3 Diodes & Single Flash on 3 Diodes
Steady Light on All
E-915AA / E-915BB / E-915RR / E-915WW
E-915AA / E-915BB / E-915RR / E-915WW
E-915AA / E-915BB / E-915RR / E-915WW
E-915AA / E-915BB / E-915RR / E-915WW
E-915AA / E-915BB / E-915RR / E-915WW
For Synchronizing 2+ Lights
(
refer to Synchronization Manual
)
