Doc. No: Unex-HDG-20-001
3/11
A printed version of this document is an uncontrolled copy
© 2020 Unex Technology Corporation – Company Confidential
1. Objective
The purpose of this document is to provide you with information necessary to install,
set and customize settings, including troubleshooting of the VTX-301 start-up. To ensure
safe installation and operation of the equipment, read the safety guidelines at the beginning
of this manual and follow the procedures outlined in the following chapters before
connecting power to the motherboard or to the I/O cable of VTX-301. Keep this operating
manual handy and distribute to all users, technicians and maintenance personnel for
reference.
2. Reference
•
Unex VTX-301 datasheet
•
Hirose U.FL series catalog
•
I-PEX MHF Micro RF coax connector product series catalog
3. Safety Guideline
•
Do not touch the module while power is applied
•
Hold the module by its edge to avoid corrosion and contamination caused by
perspiration.
•
Do not touch the SMD components without wearing ESD personal protective
equipment.
•
Operators handling the product should wear ESD personal protective equipment at
all times.
•
Keep working area clean and dry while assembling
•
Keep the operating environment clean and dry at all times
•
When operating under extreme temperature/humidity conditions, environmental
control measures (e.g. heating, cooling, or dehumidifying) should be considered
4. FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
