SEA VISION LIGHTS MAINTENANCE AND CARE
T
hank you for purchasing Sea Vision underwater lights. We manufacture the best quality lights on the market and are
recognized as an industry leader. The lights have been rigorously tested to provide you with a product that will last for
years if properly maintained. Sea Vision underwater lights require very little maintenance, but they are not maintenance free.
Below you will find information on the maintenance and care of our underwater lights and following this information will help
extend the life of your lights and give you years of enjoyment. All lights are warranted for two years.
SV16 model
SV20 model
SV19 model
SV10 model
SV14-alu model
SV14-ss model
Every 6 months:
Remove light backing cap, lamp,
reflector and then check light lens
for leaks or corrosion.
Make sure all gaskets, o-rings and
threads are in good condition.
Spray all exterior light components
with waterproofing / lubricant /
protectant of your choice.
Clean the exterior light lens using
a soft plastic scraper or soft scrub brush.
Every 2 to 3 Years:
When the boat is hauled out of the water, remove the light lens and replace the glass gaskets
(for SV10 and SV14 lights only)
www.seavision.com
