Appendix
—
Regulatory Compliance
Declaration of Conformity - FCC
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
Apple’s instructions, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his or her own expense.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off
and on, the user must correct the interference. It is recommended that
you first try one or more of the following measures:
1.
Re-orient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment to an outlet on a different circuit from that
to which the receiver is connected.
4.
Consult the dealer or an experienced radio/TV technician for
help.
IMPORTANT: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the users author-
ity to operate the equipment.
This product was tested for FCC compliance under conditions that
included the use of shielded cables and connectors between system
components. It is important that you use shielded cables and connec-
tors between system components to reduce the possibility of causing
interference to radios, television sets, and other electronic devices.
You can obtain proper shielded cables and connectors through an
authorized dealer.
You may find the following booklet prepared by the Federal Communi-
cations commissions helpful: