Umano Medical ooksnow FL36 Скачать руководство пользователя

Страница: 42 / 93

OPERATING INSTRUCTIONS

USER MANUAL — 74-36105-ENG R5

Footboard control

Footboard control is located on the board at the food end of the bed. Do not use sharp or small pointed objects

on membranes to avoid permanent damages. Pictograms inform the user of positioning possibilities and features.

IMPORTANT

Refer to the

pictograms and definitions

section (page 14) to support identification.

Power up and battery charge level

A green LED indicator constantly ON by the power cord pictogram indicates the bed is power

supplied.

If bed operates on battery, after 2 minutes of non-motion, the sleep mode will activate to save energy; all LED

indicators will turn off, power cord LED indicator will be off. The battery charge level is given by the battery

pictogram with integrated LED.

• No LED section ON, bed is plugged and power supplied: battery is fully charged.
•

3 LED sections flashing green, bed is plugged and power supplied: battery charging,

all functions can operate.

• 3 LED sections solid green, bed is unplugged: battery fully charged - only bed

motions will operate.

• 2 LED sections solid green, bed is unplugged: battery level decreased - only bed

motions will operate, beep at activation.

• 1 LED section solid red, bed is unplugged: battery level is low - none of bed functions

will operate, constant beep signal at activation.

Содержание ooksnow FL36






























































































Результаты поиска

Содержание ooksnow FL36

Отзывы:

Похожие инструкции для ooksnow FL36

Бренды по названию

Популярные бренды

Umano Medical ooksnow FL36, Руководство пользователя

Результаты поиска

Содержание ooksnow FL36

Отзывы:

Похожие инструкции для ooksnow FL36

Бренды по названию

Популярные бренды