background image

 

Safety 2 

 

 

 

DANGER 

 

Do not overhaul or repair or remodel this product. It will cause an accident, 
abnormal action, or malfunction. Only authorized repairers or engineers should 
do it. 

WARNING 

Detach the oil filtration system from power source as checking.   
 

DANGER 

If there is any abnormal noise, stop the pump immediately and get it inspected 
and repaired. 

WARNING 

Do not use this product in an explosive or flammable atmosphere. It will cause 
personal injuries or fires. 

WARNING 

Do not bring this product close to fire or put into fire. It will cause an explosion 
or a fire. 

WARNING 

Do not touch the pump while operational. 
 

DANGER 

Do not install or remove anything during the operation (It will cause oil-leakage 
or explosion). 

WARNING 

Do not cut an element fiber

nor process adhesives, etc.(It will loose a fiber 

shape

and will not function as the element) 

 
WARNING 

If the fiber element got in your eyes

do not rub; it might cause some damages in 

the eyes. After washing the eyes well with clean water, please receive a 
treatment with a doctor immediately. 

 
CAUTION 

In case of damages with the oil filtration system, turn off the switch immediately 
and unplug the power line. For safety, please contact the place you purchased the 
pump or the address listed in this manual. 

 

 

DANGER 

 

The power source for this unit is set for 100V.   
Do not use other than this. 

 

DANGER 

 

Be sure to connect an earth wire. 

0-4.Acceptance of Oil Filtration and Storage

 

(1)  Acceptance of Oil Filtration 

We deliver the product with utmost care. However, after unpacking, please check up and confirm 
items shown below just in case. 
 

 

Содержание UFO-003




















Отзывы: