Ultrasonix SonixTouch Q+, Руководство по обслуживанию

Страница: 106 / 148

Chapter 8: DICOM 00.053.204, Revision A SonixTouch Q+ Service Manual
8-10
8.1.3.3 DICOM Print Settings – AE Configuration Advanced Print Settings
The DICOM Print (AE Configuration) Advanced Print Settings dialog enables configuration of advanced printing
options.
To Access AE Configuration-Specific Advanced Print Settings:
1. Tap the touch screen Menu button.
2.
Select Administrator > DICOM > Print… > AE Configuration > Settings… > Advanced Print Settings .
Figure 8-10: DICOM Print Settings – AE Configuration – Advanced Print Settings
Table 8-9: DICOM Print Settings – AE Configuration – Advanced Print Settings
Film
Bo
x Attributes
Orientation Select the Orientation of the print page: Portrait or Landscape .
Size Select the Size of the print page.
Magnification Select the method of Magnification : Replicate , Bilinear , Cubic or None .
Smoothing
Select the Smoothing .
Note: This option is printer-specific and only available if Cubic Magnification is selected in
the previous field.
Trim Select Yes or No to use a border ( Trim ) on each page.
Configuration Enter printer-specific Configuration information.
Border Density Select the Border Density : Black or White .
Empty Density Select the Empty Density: Black or White .
Minimum Density Enter the minimum image density in hundredths of OD ( Optical Density ).
Maximum Density Enter the maximum image density in hundredths of OD .
Imag
e Bo
x
At
tribu
tes Polarity
Select the Polarity : Normal or Reverse .
Image Size Enter the printer-specific Image Size in mm.