Ultrasonix SonixTablet Скачать руководство пользователя страница 89

Страница: 89 / 123

SonixTablet Service Manual

00.053.129, Revision C

Chapter 11: Maintenance

11-3

11.2.3 Power Cord(s)

Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe the power cord:

• water
• mild detergent (PH level at or near 7) and water solution.

11.2.4 Barcode Reader

Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe the barcode reader:

• water
• mild detergent (PH level at or near 7) and water solution.

11.2.5 Wireless Adapter (When Connected Externally)

Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe the wireless adapter:

• water
• mild detergent (PH level at or near 7) and water solution.

Cautions:

Power off and unplug the system prior to cleaning.

DO NOT apply cleaning solutions directly to the power cord.

Warning:

Disconnect the barcode reader prior to cleaning.

Caution:

DO NOT apply cleaning solutions directly to the barcode reader.

Note:

Barcode reader usage should not entail patient contact.

Warning:

Disconnect the wireless adapter prior to cleaning.

Caution:

DO NOT apply cleaning solutions directly to the wireless adapter.

Note:

Wireless adapter usage should not entail patient contact.

Содержание SonixTablet




























































































































Результаты поиска

Содержание SonixTablet

Отзывы:

Похожие инструкции для SonixTablet

Бренды по названию

Популярные бренды

Ultrasonix SonixTablet, Руководство по обслуживанию

Результаты поиска

Содержание SonixTablet

Отзывы:

Похожие инструкции для SonixTablet

Бренды по названию

Популярные бренды