Ultrasonix SONIX Series, Руководство по обслуживанию

Страница: 76 / 136

8.4 ULTRASOUND MODULO SERVICING
8.4.1 Back-up User Data/Presets (as required)
Before you replace the Ultrasound Modulo, you must back up user data such that it can be
transferred into the new Ultrasound Modulo
Equipment required: USB Memory stick or removable disk.
1. Power on the SONIX system and wait till the system fully loads.
2. Plug in a USB Memory Stick or any removable disk on to one of the USB ports in the
front of the console.
3. Press the console MENU button.
4. Click on
System... > Export
to begin exporting user data. A window may pop-up to
confirm your request
8.4.2 Back-up Patient Data (as required)
Equipment required: Writable media (CD, DVD, USB key or drive)
The image management system enables users to transfer stored images and cine clips to a
storage medium (DICOM Archiver, CD, USB key, etc.).
•
To select an entire study, check the checkbox for the desired study.
•
To select all studies for a patient, check the checkbox for the desired patient.
To Transfer Patient Studies
1. Power on the SONIX system and wait till the system fully loads.
2. Press the console ID button.
3. Select the patients to be backed up.
4. Click the
Review
button.
5. Select the desired patient, study date, and/or images. The amount of memory required
is listed under
Image Management section – Queue Size
.
6. Insert a USB key or CD.
Note: A list of available destinations will not display of this step is not followed.
Chapter 8: Field Service Components SSM – 001, Revision F SONIX Service Manual
68